Usted está aquí: Casa » Productos » Hide Products » Isolatorable Airborne Particle Counter

Detalle del producto


Compartir con:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Isolatorable Airborne Particle Counter

Estado de Disponibilidad:

Isolatorable Airborne Particle Counter

Airborne Particle Counter (APC) is fully compliant with ISO14644-2015 and ISO21501-4 standard.

Capacitive touch screen8.0″


Data 5 million sets

Portable 6.1Kg

Product details

Product Feature

8 inch capacitive touchscreen, quick response

Even with two pairs of latex gloves

Sealed 316L stainless steel enclosure and dust plug to prohibit dust and water

Automatically Collect Air Samples

APC data exceed the limit,triggers the BAS to start sampling

Operation Interface


-Standard report: one key to generate ISO/EUGMPI CHINESEGMP reports

-Data review and data export

1. Sum up data by zone.

2.Freely switch counting unit between △/Σ/#,m /ft.

3.Automatically generate UCL values and average values

4.Search for sample records precisely by time,zone and operator.

-Data integrity: featured with audit trail.


- Real-time concentration curves, to get a better understanding of environmental particle condition.

- Quick editing function, to make sampling more flexible.


- Clear layout for orders. Simple and easy to use.

- One-click for system software upgrade.

- Multiple sets of personalized sampling schemes

can be customized for any zone.


FLOW RATE: A110: 100LPM±3%

A120: 50LPM±3%

A130: 28.3LPM±3%

SIZE RANGE: A110: 0.5µm-25µm

A120, A130: 0.3µm-25µm

SIZE CHANNELS: A110: 0.5µm, 1.0µm, 2.0µm, 3.0µm, 5.0µm, 10.0µm

A120, A130: 0.3µm, 0.5µm, 1.0µm, 3.0µm, 5.0µm, 10.0µm

SIZE RESOLUTION: <15% @ 0.5&micro;m (meets ISO 21501-4)

COUNT EFFICIENCY: A110: 50% &plusmn;20% for 0.5&micro;m, 100% &plusmn;10% for >0.75&micro;m (meets ISO 21501-4 and JIS B9921)

A120, A130: 50% &plusmn;20% for 0.3&micro;m, 100% &plusmn;10%for >0.45&micro;m (meets ISO 21501-4 and JIS B9921)

CONCENTRATION LIMIT: A110: 560,000 particles/ft&sup3;at 10% coincidence loss

A120: 840,000 particles/ft&sup3;at 10% coincidence loss

A130: 1,400,000 particles/ft&sup3;at 10% coincidence loss

ZERO COUNT: <1count/5min

EXHAUST: Internal HEPA filter (>99.997%@0.3&micro;m)

ZONE/ LOCATION: 20,000 rooms and 200,000 locations

SAMPLING TIME: 1 second to 168 hours

CYCLES: 1000 samples on one location

LASER SOURCE: Long life laser

DATA STORAGE: 3.5G, ≥5,000,000 sets of sample records

DISPLAY: 8” LCD capacitive touch screen

LANGUAGE: Chinese, English

DATA RELIABILITY: Compliant with 21 CFR Part 11


CALIBRATION FREQUENCY: Recommend at least once a year

DIMENSIONS (HXWXD): 254x204x263mm

WEIGHT: 6.1Kg (13.45lbs) (without battery)

ENCLOSURE: 316L Stainless Steel

POWER: AC 100-240V, 50 Hz/60 Hz

BATTERY: 10.8V, 9000mAh, rechargeable lithium battery

BATTERY ENDURANCE: A110: running for 4 hours

A120: running for 7 hours

A130: running for 9 hours

MAX POWER: consumption AC 90W

OPERATING CONDITIONS TEMPERATURE:: 5℃-35℃, relative humidity up to 95%

STORAGE CONDITIONS TEMPERATURE: -10℃-40℃, relative humidity up to 98%

SAFETY: EN 61010-1:2010, EN 61326-1:2013, EN 61326-2-2:2013,EN 60825-1:2014, EN 61000-6-1:2007, EN 61000-6-3:2007+A1,FCC Part 15, Subpart B

WARRANTY: 2 years after activation





Touch【Group】icon to open the group list, and select the group in which the room to sample is.


Touch【Zone】icon to open the room list, and select the sampling room.

Sampling SCM

Touch【Sampling SCM】icon to open the sampling scheme list, and select the sampling SCM. One room can be associated with several schemes. And one scheme can be associated with several rooms.

Sampling Rule

Sampling rule consists of NORM mode and Custom mode. The NORM mode is used for the samplings per ISO/EUGMP/CHINESEGMP/Fed Std. Under this mode, parameters cannot be modified after the room and sampling scheme are selected (the background of sampling conditions turn to grey.) If the sampling process is stopped, the result of the standard report is invalid. The Custom mode is used for sampling for other purposes. Under this mode, sampling parameters such as location, volume, sample time can be modified and a sampling can be stopped at any moment.


The location cannot be changed under the NORM mode. It can be a selection list option under the Custom mode.



In auto mode, the first sample of each location complies with the delay. The following samples comply with the interval. In the case of manual mode, all samples comply with the delay. The sampling can be stopped during delay and interval. Press the start icon again to continue the sampling. In the case of custom mode, delay and interval can be changed at any moment. The countdown mode is used for delay and interval.

When the sampling interval time is more than or equal to 2min, the blower stops running after the first cycle ends for 10s, and the blower starts running again at 20s before the next cycle.


This shows the current sampled volume (above the line) and total volume of the sample (below the line). In NORM mode, the volume cannot be changed.

Sample Time

This shows the current sampled time (above the line) and total time of the sample (below the line). In NORM mode, the sample time cannot be changed.


This shows the number of samples which are being taken in the current location (left of the split) and the total number of the samples (right of the split).

Auto Sample

If checked, the sampling will stop after all the samples on one location are finished.

Auto Print

If checked, the data will be printed automatically after each sampling is complete. If NORM mode is selected, data of one location will be printed when sampling(s) of this location are all completed. If manual mode is selected, data of each sample will be printed when this sample is completed.


The curves show the instantaneous data of the 0.5μm and 5.0μm particle channel in real time.

Location display

It shows the number of locations in the sampling room. Flashing green light indicates the sampling is underway in this location. Green light indicates the location which the sampling has completed. If alarm appears during the sampling, this location should appear in red light.

Touch to display the set channel threshold.

Set the counting mode, counting unit and size channel for the data displaying during the sampling.

Counting mode consists of ∑ cumulative count and Δ differential count. Cumulative count: the number of particles in and above the selected channel. Differential count: the number of particles between the selected channel and adjacent channel. Counting unite: #, #/ft3, #/m3. Size channel: 0.5/1.0/2.0/3.0/5.0/10.0&micro;m (A110) or 0.3/0.5/1.0/3.0/5.0/10.0&micro;m (A120, A130). All of the particle size channel or part of the particle size channel can be selected to display

Print the sample data.

If there is an abnormal situation during the latest sampling process, the sampling result may be deviated from the actual sampling environment, and a new sampling can be conducted through this function. Touch【】icon, depending on the sampling condition of the lastest sample, a new sampling is conducted.

MicronView Limited se aprovecha de la óptica y la biotecnología para lograr un monitoreo de entorno estéril rápido y en tiempo real, proporcionando instrumentos de monitoreo avanzados y consumibles para entornos de producción y productos terminados en las industrias alimentaria, farmacéutica y cosmética.
Navegación rápida

Categoría de Productos

MicronView Limited

2300 Highway 365 Suite 110, Nederland Texas 77630,  USA.
Derechos de autor 2021 Micron View Limited. Todos los derechos reservados. Mapa del sitio| Con apoyo de Letrero