 |
|
| |
Dustproof Airborne Particle Counter for Cleanroom
Airborne Particle Counter (APC) is fully compliant with ISO14644-2015 and ISO21501-4 standard.
Capacitive touch screen8.0″
Zone20,000
Data 5 million sets
Portable 6.1Kg
Product details
Product Feature
8 inch capacitive touchscreen, quick response
Even with two pairs of latex gloves
Sealed 316L stainless steel enclosure and dust plug to prohibit dust and water
Automatically Collect Air Samples
APC data exceed the limit,triggers the BAS to start sampling
Operation Interface
Data
-Standard report: one key to generate ISO/EUGMPI CHINESEGMP reports
-Data review and data export
1. Sum up data by zone.
2.Freely switch counting unit between △/Σ/#,m /ft.
3.Automatically generate UCL values and average values
4.Search for sample records precisely by time,zone and operator.
-Data integrity: featured with audit trail.
Sampling
- Real-time concentration curves, to get a better understanding of environmental particle condition.
- Quick editing function, to make sampling more flexible.
Setup
- Clear layout for orders. Simple and easy to use.
- One-click for system software upgrade.
- Multiple sets of personalized sampling schemes
can be customized for any zone.
Battery installation
(1) Remove the battery cover at the rear of the device and insert the battery (note the installation direction). See chart 4-1.
(2) Close the battery cover.
Isokinetic probe installation
(1) Connect the isokinetic probe and sample inlet with a sample tubing. See chart 4-2.
(2) Fix the isokinetic probe on the adjustable tripod mount (optional), connect the isokinetic probe and sample inlet with a sample tubing.
Paper roll installation
(1) Press the raised switch on the upper-right side of the thermal printer to open the printer lid.
(2) Install the paper roll into the printer and close the printer lid. See chart 4-3.
(3) Press feed button to confirm the paper has been installed correctly.
Dustproof Airborne Particle Counter for Cleanroom
Airborne Particle Counter (APC) is fully compliant with ISO14644-2015 and ISO21501-4 standard.
Capacitive touch screen8.0″
Zone20,000
Data 5 million sets
Portable 6.1Kg
Product details
Product Feature
8 inch capacitive touchscreen, quick response
Even with two pairs of latex gloves
Sealed 316L stainless steel enclosure and dust plug to prohibit dust and water
Automatically Collect Air Samples
APC data exceed the limit,triggers the BAS to start sampling
Operation Interface
Data
-Standard report: one key to generate ISO/EUGMPI CHINESEGMP reports
-Data review and data export
1. Sum up data by zone.
2.Freely switch counting unit between △/Σ/#,m /ft.
3.Automatically generate UCL values and average values
4.Search for sample records precisely by time,zone and operator.
-Data integrity: featured with audit trail.
Sampling
- Real-time concentration curves, to get a better understanding of environmental particle condition.
- Quick editing function, to make sampling more flexible.
Setup
- Clear layout for orders. Simple and easy to use.
- One-click for system software upgrade.
- Multiple sets of personalized sampling schemes
can be customized for any zone.
Battery installation
(1) Remove the battery cover at the rear of the device and insert the battery (note the installation direction). See chart 4-1.
(2) Close the battery cover.
Isokinetic probe installation
(1) Connect the isokinetic probe and sample inlet with a sample tubing. See chart 4-2.
(2) Fix the isokinetic probe on the adjustable tripod mount (optional), connect the isokinetic probe and sample inlet with a sample tubing.
Paper roll installation
(1) Press the raised switch on the upper-right side of the thermal printer to open the printer lid.
(2) Install the paper roll into the printer and close the printer lid. See chart 4-3.
(3) Press feed button to confirm the paper has been installed correctly.
