 |
|
| |
Validated Particle Counter
Airborne Particle Counter (APC) is fully compliant with ISO14644-2015 and ISO21501-4 standard.
Capacitive touch screen8.0″
Zone20,000
Data 5 million sets
Portable 6.1Kg
Product details
Product Feature
8 inch capacitive touchscreen, quick response
Even with two pairs of latex gloves
Sealed 316L stainless steel enclosure and dust plug to prohibit dust and water
Automatically Collect Air Samples
APC data exceed the limit,triggers the BAS to start sampling
Operation Interface
Data
-Standard report: one key to generate ISO/EUGMPI CHINESEGMP reports
-Data review and data export
1. Sum up data by zone.
2.Freely switch counting unit between △/Σ/#,m /ft.
3.Automatically generate UCL values and average values
4.Search for sample records precisely by time,zone and operator.
-Data integrity: featured with audit trail.
Sampling
- Real-time concentration curves, to get a better understanding of environmental particle condition.
- Quick editing function, to make sampling more flexible.
Setup
- Clear layout for orders. Simple and easy to use.
- One-click for system software upgrade.
- Multiple sets of personalized sampling schemes
can be customized for any zone.
Troubleshooting
9 | Flow error. | Operating environment does not meet requirements. | Operate the device in the required environment. |
Inlet is blocked. | Check if there is any blockage inside the inlet. If not, return to us or the local distributor for service. | ||
Internal gas path failure. | Return to us or the local distributor for service. | ||
Sensor failure. | Return to us or the local distributor for service. | ||
10 | Enclosure of device is overheating. | Internal parts are damaged. | Shut down the device and do not operate for a period of time. If the problem persists after restart, return to us for service. |
11 | Touch screen failure or insensitive touch. | Touch screen needs adjusting. | Return to us or the local distributor for service. |
Touch screen is damaged | Return to us or the local distributor for service. | ||
12 | Display screen is blurring. | System malfunction. | If the problem persists after shutdown and restart, return to us for service. |
Touch screen is in poor contact or is damaged. | Return to us or the local distributor for service. |
Validated Particle Counter
Airborne Particle Counter (APC) is fully compliant with ISO14644-2015 and ISO21501-4 standard.
Capacitive touch screen8.0″
Zone20,000
Data 5 million sets
Portable 6.1Kg
Product details
Product Feature
8 inch capacitive touchscreen, quick response
Even with two pairs of latex gloves
Sealed 316L stainless steel enclosure and dust plug to prohibit dust and water
Automatically Collect Air Samples
APC data exceed the limit,triggers the BAS to start sampling
Operation Interface
Data
-Standard report: one key to generate ISO/EUGMPI CHINESEGMP reports
-Data review and data export
1. Sum up data by zone.
2.Freely switch counting unit between △/Σ/#,m /ft.
3.Automatically generate UCL values and average values
4.Search for sample records precisely by time,zone and operator.
-Data integrity: featured with audit trail.
Sampling
- Real-time concentration curves, to get a better understanding of environmental particle condition.
- Quick editing function, to make sampling more flexible.
Setup
- Clear layout for orders. Simple and easy to use.
- One-click for system software upgrade.
- Multiple sets of personalized sampling schemes
can be customized for any zone.
Troubleshooting
9 | Flow error. | Operating environment does not meet requirements. | Operate the device in the required environment. |
Inlet is blocked. | Check if there is any blockage inside the inlet. If not, return to us or the local distributor for service. | ||
Internal gas path failure. | Return to us or the local distributor for service. | ||
Sensor failure. | Return to us or the local distributor for service. | ||
10 | Enclosure of device is overheating. | Internal parts are damaged. | Shut down the device and do not operate for a period of time. If the problem persists after restart, return to us for service. |
11 | Touch screen failure or insensitive touch. | Touch screen needs adjusting. | Return to us or the local distributor for service. |
Touch screen is damaged | Return to us or the local distributor for service. | ||
12 | Display screen is blurring. | System malfunction. | If the problem persists after shutdown and restart, return to us for service. |
Touch screen is in poor contact or is damaged. | Return to us or the local distributor for service. |
