 |
|
| |
Remote Sampling Dual-Flow BioAerosol Sampler
Remote sampling head connection
(1) Take down the sampling head by unscrewing towards counterclockwise. Install the adapter on the DBAS, screw the sampling head on the remote sampling head.
(2) Connect the sampling tube with the gas inlet of adapter and the other side with gas outlet of remote sampling head.
For laminar flow tables, isolators, biosafety cabinets
or other critical areas where it is not convenient to place sampling equipment directly
The BAS can be sampled via a remote sampling kit, supporting up to 8 meters of sampling tubes
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours(100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ capacitive touchscreen,rapid response
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life
100L/min≥10hours (60m³）
200L/min≥4hours (48m³）
Flow Accuracy
±2.5%（100L/min）
±3% (200L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
*The remote/isolator sampling can only support the flow rate of 100L/min*
Specification
FLOW RATE： 100L/min 200L/min
FLOW RATE ACCURACY： ±2.5%
ZONE： Over 20000 locations
SAMPLING VOLUMES： 1-6000L, 6 default volumes
DELAY： 0-59minutes59seconds
CYCLES： 1-99cycles
INTERVAL： 0-59minutes59seconds
SAMPLING HEAD： Φ0.85mm*280holes
DIMENSIONS： Φ110mm, H: 202mm (without foot mat)
WEIGHT： 2.7kg(6.0lbs)
EXTERNAL SURFACE： Anodized aluminium
POWER： 24V±10% AC adapter
BATTERY： 10.8V, 6800mAh rechargeable lithium battery, running for over 10 hours
DATA STORAGE： 20000 sets of sample records
DISPLAY： 4.3" capacitive touch screen
LANGUAGE： Chinese, English
CALIBRATION FREQUENCY： Recommend once a year
OPERATING CONDITIONS TEMPERATURE：5℃-30℃, relative humidity up to 80%
STORAGE CONDITIONS TEMPERATURE： 0℃-40℃, relative humidity up to 80%
SAFETY： EN 61010-1:2010, EN 61326-1:2013, EN 61326-2-2:2013,EN 61000-6-1:2007, EN 61000-6-3:2007+A1
WARRANTY： 2 years after activation
Remote Sampling Dual-Flow BioAerosol Sampler
Remote sampling head connection
(1) Take down the sampling head by unscrewing towards counterclockwise. Install the adapter on the DBAS, screw the sampling head on the remote sampling head.
(2) Connect the sampling tube with the gas inlet of adapter and the other side with gas outlet of remote sampling head.
For laminar flow tables, isolators, biosafety cabinets
or other critical areas where it is not convenient to place sampling equipment directly
The BAS can be sampled via a remote sampling kit, supporting up to 8 meters of sampling tubes
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours(100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ capacitive touchscreen,rapid response
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life
100L/min≥10hours (60m³）
200L/min≥4hours (48m³）
Flow Accuracy
±2.5%（100L/min）
±3% (200L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
*The remote/isolator sampling can only support the flow rate of 100L/min*
Specification
FLOW RATE： 100L/min 200L/min
FLOW RATE ACCURACY： ±2.5%
ZONE： Over 20000 locations
SAMPLING VOLUMES： 1-6000L, 6 default volumes
DELAY： 0-59minutes59seconds
CYCLES： 1-99cycles
INTERVAL： 0-59minutes59seconds
SAMPLING HEAD： Φ0.85mm*280holes
DIMENSIONS： Φ110mm, H: 202mm (without foot mat)
WEIGHT： 2.7kg(6.0lbs)
EXTERNAL SURFACE： Anodized aluminium
POWER： 24V±10% AC adapter
BATTERY： 10.8V, 6800mAh rechargeable lithium battery, running for over 10 hours
DATA STORAGE： 20000 sets of sample records
DISPLAY： 4.3" capacitive touch screen
LANGUAGE： Chinese, English
CALIBRATION FREQUENCY： Recommend once a year
OPERATING CONDITIONS TEMPERATURE：5℃-30℃, relative humidity up to 80%
STORAGE CONDITIONS TEMPERATURE： 0℃-40℃, relative humidity up to 80%
SAFETY： EN 61010-1:2010, EN 61326-1:2013, EN 61326-2-2:2013,EN 61000-6-1:2007, EN 61000-6-3:2007+A1
WARRANTY： 2 years after activation
