You are here: Home » Products » Hide Products » HEPA filter Airborne Particle Counter for Compressed Air

Product Detail

Share to:

HEPA filter Airborne Particle Counter for Compressed Air

Availability:

HEPA filter Airborne Particle Counter for Compressed Air

Airborne Particle Counter (APC) is fully compliant with ISO14644-2015 and ISO21501-4 standard.

Capacitive touch screen8.0″

Zone20,000

Data 5 million sets

Portable 6.1Kg

Product details

Product Feature

8 inch capacitive touchscreen, quick response

Even with two pairs of latex gloves

Sealed 316L stainless steel enclosure and dust plug to prohibit dust and water

Automatically Collect Air Samples

APC data exceed the limit,triggers the BAS to start sampling

Operation Interface

Data

-Standard report: one key to generate ISO/EUGMPI CHINESEGMP reports

-Data review and data export

1. Sum up data by zone.

2.Freely switch counting unit between △/Σ/#,m /ft.

3.Automatically generate UCL values and average values

4.Search for sample records precisely by time,zone and operator.

-Data integrity: featured with audit trail.

Sampling

- Real-time concentration curves, to get a better understanding of environmental particle condition.

- Quick editing function, to make sampling more flexible.

Setup

- Clear layout for orders. Simple and easy to use.

- One-click for system software upgrade.

- Multiple sets of personalized sampling schemes

can be customized for any zone.


Device

Device is used for displaying the information of the software and firmware. It includes device name, model, serial number, hardware version, software version, etc. The software can be upgraded on this interface. See chart 5-3-15.

Update is used for upgrading the software version. APC supports continuous version upgrades and cross version upgrades. Insert the MicronView USB flash drive into the USB A port at the back of the device. Touch the【Update】icon, search and select the upgrade file, touch【】icon to confirm. See chart 5-3-16.

Back- up is used to export all information in the device to the MicronView USB flash drive in the form of db files. When connected to the USB flash drive, touch【Back-up】icon, and a prompt box ‘Backup completed’ will display after the back-up is complete. Touch【OK】icon to confirm. Restore is used to import device information in the form of db file to the device. Insert the MicronView USB flash drive with the db file includes device information into the USB A port at the back of the device. Touch【Restore】icon to restore the device information. When restoring, it is necessary to confirm that the serial number and version of the db file name in the USB flash drive are the same as those displayed in the device information; otherwise, the prompt message of ‘restoration failure’ will be displayed. After the restoration is completed, the device automatically shut down. After restarting, the device can be used normally.



Previous: 
Next: 

PRODUCT CATEGORY

CONTACT US
Feedback
MicronView Limited takes advantage of optics and biotechnology to achieve fast, real-time sterile environment monitoring, by providing advanced monitoring instruments and consumable for production environments and finished products of food, pharmaceutical and cosmetic industries.
Quick Navigation

Products Category

Micronview Limited

  1-520-528-1882
 mv@micronview.com
  2300 Highway 365 Suite 110,  Nederland Texas 77630, USA
Copyright  2021 Micron View Limited.   All rights reserved.  Sitemap | Support By Leadong