 |
|
| |
High-Flow BioAerosol Sampler With LED Lighting
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours (100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ rapid response capacitive touchscreen
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life 100L/min≥10hours (60m³）
Flow Accuracy ±2.5%（100L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
Operation Interface
Data
- Intuitive sampling records
- Search function for quick search of records - One-click for exporting and printing
Sampling
- Intelligent sampling mode enables continuous and cyclic sampling
-The sampling process is clear and distinct
LED lighting and beep prompt error
Setup
- Smart Settings mode
- User-friendly input method
Safety Instructions
Power supply
Caution
Do not disassemble or modify the cable.
Do not place any heavy objects on the cable. Keep the cable away from heat sources. Otherwise, the cord’s insulating layer may melt and could create an electric shock hazard or a fire hazard.
Do not stretch the cable, or it may become loose, overheat and create a fire hazard.
The cable may be damaged if it is placed under strain. Using a damaged cable may create a fire hazard or electric shock hazard.
Do not handle the power cord or cable with wet hands, or it could be an electric shock hazard.
Do not place any items on the AC adapter. It could cause overheating and result in fire or electric shock.
Do not use an AC adapter that is not supplied by MicronView, or it could be a fire hazard.
Do not use the supply voltage out of range of AC adapter, or it could be a fire hazard or an electric shock hazard.
To unplug, always grasp the power cord. Do not stretch the cable, as it may expose the core of the cable or damage the insulation. It may result in electric leakage, and it could be a fire hazard or an electric shock hazard.
Specification
FLOW RATE： 100L/min
FLOW RATE ACCURACY： ±2.5%
ZONE： Over 20000 locations
SAMPLING VOLUMES： 1-6000L, 6 default volumes
DELAY： 0-59minutes59seconds
CYCLES： 1-99cycles
INTERVAL： 0-59minutes59seconds
SAMPLING HEAD： Φ0.60mm*280holes
DIMENSIONS： Φ110mm, H: 202mm (without foot mat)
WEIGHT： 2.7kg(6.0lbs)
EXTERNAL SURFACE： Anodized aluminium
POWER： 24V±10% AC adapter
BATTERY： 10.8V, 6800mAh rechargeable lithium battery, running for over 10 hours
DATA STORAGE： 20000 sets of sample records
DISPLAY： 4.3" capacitive touch screen
LANGUAGE： Chinese, English
CALIBRATION FREQUENCY： Recommend once a year
OPERATING CONDITIONS TEMPERATURE：5℃-30℃, relative humidity up to 80%
STORAGE CONDITIONS TEMPERATURE： 0℃-40℃, relative humidity up to 80%
SAFETY： EN 61010-1:2010, EN 61326-1:2013, EN 61326-2-2:2013,EN 61000-6-1:2007, EN 61000-6-3:2007+A1
WARRANTY： 2 years after activation
High-Flow BioAerosol Sampler With LED Lighting
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours (100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ rapid response capacitive touchscreen
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life 100L/min≥10hours (60m³）
Flow Accuracy ±2.5%（100L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
Operation Interface
Data
- Intuitive sampling records
- Search function for quick search of records - One-click for exporting and printing
Sampling
- Intelligent sampling mode enables continuous and cyclic sampling
-The sampling process is clear and distinct
LED lighting and beep prompt error
Setup
- Smart Settings mode
- User-friendly input method
Safety Instructions
Power supply
Caution
Do not disassemble or modify the cable.
Do not place any heavy objects on the cable. Keep the cable away from heat sources. Otherwise, the cord’s insulating layer may melt and could create an electric shock hazard or a fire hazard.
Do not stretch the cable, or it may become loose, overheat and create a fire hazard.
The cable may be damaged if it is placed under strain. Using a damaged cable may create a fire hazard or electric shock hazard.
Do not handle the power cord or cable with wet hands, or it could be an electric shock hazard.
Do not place any items on the AC adapter. It could cause overheating and result in fire or electric shock.
Do not use an AC adapter that is not supplied by MicronView, or it could be a fire hazard.
Do not use the supply voltage out of range of AC adapter, or it could be a fire hazard or an electric shock hazard.
To unplug, always grasp the power cord. Do not stretch the cable, as it may expose the core of the cable or damage the insulation. It may result in electric leakage, and it could be a fire hazard or an electric shock hazard.
Specification
FLOW RATE： 100L/min
FLOW RATE ACCURACY： ±2.5%
ZONE： Over 20000 locations
SAMPLING VOLUMES： 1-6000L, 6 default volumes
DELAY： 0-59minutes59seconds
CYCLES： 1-99cycles
INTERVAL： 0-59minutes59seconds
SAMPLING HEAD： Φ0.60mm*280holes
DIMENSIONS： Φ110mm, H: 202mm (without foot mat)
WEIGHT： 2.7kg(6.0lbs)
EXTERNAL SURFACE： Anodized aluminium
POWER： 24V±10% AC adapter
BATTERY： 10.8V, 6800mAh rechargeable lithium battery, running for over 10 hours
DATA STORAGE： 20000 sets of sample records
DISPLAY： 4.3" capacitive touch screen
LANGUAGE： Chinese, English
CALIBRATION FREQUENCY： Recommend once a year
OPERATING CONDITIONS TEMPERATURE：5℃-30℃, relative humidity up to 80%
STORAGE CONDITIONS TEMPERATURE： 0℃-40℃, relative humidity up to 80%
SAFETY： EN 61010-1:2010, EN 61326-1:2013, EN 61326-2-2:2013,EN 61000-6-1:2007, EN 61000-6-3:2007+A1
WARRANTY： 2 years after activation
