Immediately BioAerosol Monitoring System for Air
Bioaerosol Monitoring System
BioAerosol Monitoring System (BAMS) is used for real-time environmental monitoring of microorganisms in the air.
Capacitive touch screen 8.0″
Continuous monitoring 7*24hr
Mass storage 119G
Continuous Monitoring 24/7 continuous monitoring
Real-time data for both particlesand biological particles
Efficient user oriented design
Stable and reliable
First truly portable microbial monitoring device
Compliance with FDA21 CFR Part 11
Sampling rule consists of NORM mode and Custom mode. The NORM mode is used for the samplings per ISO/EUGMP/CHINESEGMP/Fed Std. Under this mode, parameters cannot be modified after the room and sampling scheme are selected (the background of sampling conditions turn to grey.) If the sampling process is stopped, the result of the standard report is invalid. The Custom mode is used for sampling for other purposes. Under this mode, sampling parameters such as location, volume, sample time can be modified and a sampling can be stopped at any moment.
In auto mode, the first sample of each location complies with the delay. The following samples comply with the interval. In the case of manual mode, all samples comply with the delay. The sampling can be stopped during delay and interval. Press the start icon again to continue the sampling. In the case of custom mode, delay and interval can be changed at any moment. The countdown mode is used for delay and interval.
This shows the current sampled volume (above the line) and total volume of the sample (below the line). In NORM mode, the volume cannot be changed.
This shows the current sampled time (above the line) and total time of the sample (below the line). In NORM mode, the sample time cannot be changed.