 |
|
| |
Portable Dual-Flow BioAerosol Sampler
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours(100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ capacitive touchscreen,rapid response
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life
100L/min≥10hours (60m³）
200L/min≥4hours (48m³）
Flow Accuracy
±2.5%（100L/min）
±3% (200L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
*The remote/isolator sampling can only support the flow rate of 100L/min*
Operation Interface
Data
- Intuitive sampling records
- Search function for quick search of records - One-click for exporting and printing
Sampling
- Intelligent sampling mode enables continuous and cyclic sampling
-The sampling process is clear and distinct
LED lighting and beep prompt error
Setup
- Smart Settings mode
- User-friendly input method
The auto shutdown function is used to set the time for auto shutdown, sampling standby and leisure standby of the device. See chart 5-3-13. Auto shutdown is when the device is in standby mode, if there is no operation performed on the device within the set time, the device will automatically shut down. Sampling standby is during the sampling process, if no operation is performed on the device within the set time, the device will enter standby mode. Leisure standby is when the device is not in the process of sampling, if no operation is performed on the device within the set time, the device will enter the standby mode. Touch the 【Auto Shutdown】icon, the small box on the left side of the button turns green, and the corresponding time keyboard is activated. Select the number via up arrow/down arrow to set the time. The settings of sampling standby and leisure standby are similar to the auto shutdown.
Portable Dual-Flow BioAerosol Sampler
BioAerosol Air Sampler (BAS) is a high performance air sampler, based on the principle of Andersen impact method.
Flow rate 100L/min
Long battery life ≥10 hours(100L/min)
Data Storage 20,000 sets
Remote sampling 8 m
Product Features
4.3’’ capacitive touchscreen,rapid response
All components and circuits interfaces are isolated from the external environment ro prevent oxidant intrusion
Long Battery Life
100L/min≥10hours (60m³）
200L/min≥4hours (48m³）
Flow Accuracy
±2.5%（100L/min）
±3% (200L/min）
Compliance with FDA21 CFR Part 11
Remote Sampling
Powerful and stabilized pump to support Remote/Isolator sampling(up to 8m)
*The remote/isolator sampling can only support the flow rate of 100L/min*
Operation Interface
Data
- Intuitive sampling records
- Search function for quick search of records - One-click for exporting and printing
Sampling
- Intelligent sampling mode enables continuous and cyclic sampling
-The sampling process is clear and distinct
LED lighting and beep prompt error
Setup
- Smart Settings mode
- User-friendly input method
The auto shutdown function is used to set the time for auto shutdown, sampling standby and leisure standby of the device. See chart 5-3-13. Auto shutdown is when the device is in standby mode, if there is no operation performed on the device within the set time, the device will automatically shut down. Sampling standby is during the sampling process, if no operation is performed on the device within the set time, the device will enter standby mode. Leisure standby is when the device is not in the process of sampling, if no operation is performed on the device within the set time, the device will enter the standby mode. Touch the 【Auto Shutdown】icon, the small box on the left side of the button turns green, and the corresponding time keyboard is activated. Select the number via up arrow/down arrow to set the time. The settings of sampling standby and leisure standby are similar to the auto shutdown.
